Dual-cylinder electro-hydraulic hot mounting press with up to 350 bar pressure, supporting six mould sizes from 25 to 50 mm, and a built-in Hot Mounting Application Guide to maximise laboratory throughput.
The CitoPress-30 is an advanced electro-hydraulic hot mounting press featuring two independently operable cylinders, enabling high-volume laboratories to run different mounting programmes simultaneously. Its intuitive turn/push-knob interface and large LCD display are backed by a built-in Hot Mounting Application Guide that automatically detects the cylinder diameter and adapts method parameters accordingly — minimising setup time and reducing operator errors. Three-level water cooling and a selectable stand-by heat mode allow CitoPress-30 to reduce mounting times to nearly one third compared to competing presses.
| Mounting Method | Electro-hydraulic hot compression |
| No. of Cylinders | 2 (independently operable) |
| Mould Sizes | 25 / 30 / 40 / 50 mm, 1¼" / 1½" |
| Pressure Range | 50–350 bar (25 bar increments) |
| Heating Temperature | 80–180°C (5°C increments) |
| Heating / Cooling Time | 1–15 min (0.5 min increments) |
| Cooling Method | 3-level water cooling (High / Medium / Low) |
| Power Supply | 100–120V / 200–240V, 50–60Hz |
| Machine Weight | 48 kg |
| Dimensions | 550 × 560 × 450 mm |
Contact a Struers application specialist or request an equipment demonstration at your laboratory.
